Adopting professional formula, this product contains brand-new anti frication metlic compounds that could form metalic treatment layer on the various frication surface of the engine. Thus it could automatically and quickly repair the worn frication surfaces of the engine and restore the sealing ability of the cylinders. As a result, it could distinctly improve the engine power, quickly get rid of the phenomenon of burning the engine oil, and reduce the noise and blue smoke in the exhaust omission. At the same time, it could prohibit the generation of carbon sediment, gum deposit and engine sludge, and prevent the component from corrosion. It would be most suitable for new automobiles.

USAGE
1. First replace with new engine oil and the oil cooler. Start the engine and run it at idle speed for 5 minutes in order to keep it in warming stage, and then turn off the engine. 2. Add this product can by can into the engine oil chamber and run the engine at idle speed for no less than 15 minutes. 3. Add one can for the 4 6 cylinder engine or add by 5% of the quantity of the engine oil. 4. It is recommended to add once for every 12000-15000km after replacing with new engine il.

CAUTIONS
1. Only use this product when the engine il chamber is clean and the engine oil is replaced. 2.In case that the inside of the engine is dirty, please use GETSUN 5-min motor flush to clean. 3. Damaged engine (e.g. the piston ring is split), is beyond the repairing capacity of this product. 4.Store this product in a dry and Cool place with temperature below 45C， 5. Do not swallow and keep the children away from this product.
RANGE OF APPLICATION: This product is suitable for the engine with more than 6 cylinders and a mileage more than 50 thousand kilometers.

EMERGENCY AND FIRST AID PROCEDURE:
If swallowed, induce vomiting at once and then get medical help. For eye contact, wash with large amount of water immediately.